Trouble is unpredictable. It arrives without warning, when and where you least expect it. So be prepared, and be confident knowing you have up to 17 rounds of double-stack protection at the ready with the MC2c.
The MC2c grip was designed to be extremely narrow for its capacity, engineered using slim profile double-stack magazines and retaining the superior ergonomics of the pistol’s grip and palm swell. The result? Comfort in your hand and providing ease of carrying. MC2c pistols come with a flush and extended double stack magazine featuring: high-visibility followers, easy-to-remove floorplates, and are made of a coated steel that offers low friction and superior wear resistance.
Integrated into the MC2c slide are cuts that allow for direct mounting of an optic (Shield RMS footprint) that facilitates co-witness with the white 3-dot sights. Compared to standard sights, an optic-equipped pistol offers increased accuracy and quicker target aquisition. Micro-dot not included.
The patented slide cover plate design is used under license from Strike Industries (US10139174B2).
Found on MC2c models, the flat-profile trigger (approx. 5.5 lbs pull) has an integrated blade safety, a short, tactile reset, and reduced overtravel. It features a crisp, clean break and smooth take-up for less hand movement for a truer, more accurate shot.
Available as an option for both the MC2c and MC1sc series, it provides added security and peace of mind for users.
Natural and comfortable in your hand — thanks to the grip palm swell. Grip panels are integrated with aggressive texturing for added control for a confident, firm grip under a variety of conditions
Standard snag-free dovetail white 3-Dot sights on the MC2c/MC1sc offer easy target acquisition and quick draw. TRUGLO® Tritium PRO™ sights (inset) are also available as a factory option.
The MC2c grip was designed to be extremely narrow for its capacity, engineered using slim profile double-stack magazines and retaining the superior ergonomics of the pistol’s grip and palm swell. The result? Comfort in your hand and ease of concealability when needed. MC2c pistols come with 13-Round (Flush-fit) and 15-Round (Extended) double-stack magazines featuring: high-visibility followers, easy-to-remove floorplates, and are made of a coated steel that offers low friction and superior wear resistance. New reduced capacity and MA Compliant models come with a pair of Flush-fit 10-Round magazines.
FLAT PROFILE TRIGGER
MC2c SUPERIOR ERGONOMICS
REVERSABLE CROSS-BOLT SAFETY
SNAG-FREE DOVETAIL SIGHTS
Remove the magazine and lock the slide open. Clear the action by visually and physically inspecting the chamber to be certain it is unloaded. Push the rear slide plate button and slide it down.*
Once the slide plate is removed, the end of the striker assembly will be visible.
Close the action by pulling the slide fully rearward and releasing it gently. This will allow the slide to push out the striker assembly.
The striker assembly is safely removed from the pistol without ever pulling the trigger. The slide is then pushed forward towards the muzzle, and removed off of the frame.
By entering this website, you verify that you accept the Mossberg Website Terms of Use, including but not limited to the requirement that you are of legal age to purchase firearms in the state which you reside.
